石墨烯复合功能材料及其在重金属离子检测的电化学研究与应用

石墨烯(GR)是典型的单原子碳纳米材料,具有独特的二维共辄平面结构,其高活性的比表面积和突出的导电性能,在电催化和敏感材料制备领域已得到广泛的应用。氧化石墨烯(GO)作为GR的前驱体,存在大量的含氧官能团,具有良好的水溶分散性。大量GO含氧官能团的介入会破坏其K-7T共辘结构,导致其电学性能变差。GO通过化学、水热合成或直接电化学还原方法可有效修复其共辄平面结构,得到导电性良好的还原氧化石墨烯(rGO),即GR.单组分的GR材料在实际应用中仍存在某些局限性,如电学活性相对较弱,与其它材料加工复合性能较差等。将GR、G O材料与其它功能材料进行复合,可进一步改善复合物的物理或化学性能,如分散性、加工修饰和电催化活性等。综述了石墨烯材料与金属及其氧化物纳米粒子、聚合物、掺杂原子、导电离子液体、碳纳米材料等功能材料复合后,能形成可调控的微结构,具有改性的化学性质和协同发挥的电学效应,表现出显著的电子传递能力及其功能性作用。论述了GR功能化修饰的复合材料作为敏感界面,构筑基于重金属离子检测的电化学生物传感器,可以实现对Pb2+,Hg2+,C『+等多种重金属离子的同时或分别检出,提出了GR复合制备材料的纳米结构特征、功能修饰作用对于提高传感器的电催化活性和选择性性能等方面的应用,并对该研究领域进行了总结与展望。     

Supporting primary students' learning of fraction conceptual knowledge through digital games

With the advent of mobile technologies, well-designed fraction apps can be used to help children gain fraction knowledge, a challenging topic for both teachers and students. The present pilot study adopted a quasi-experimental design to investigate whether children can learn fraction concepts equally well if half of the lesson time (20 min) is replaced with game-based learning. Keeping the total lesson time (40 min) identical, the control group (N = 33) received traditional instruction, and the experimental group (N = 32) was presented with a blended learning approach spending half of the class time (20 min) playing tablet-based fraction games, where each of the learners had their own tablet. The results suggested that in the posttest, the experimental group achieved similar learning gains to the control group and appear to have achieved better performance in the transfer test than the control group. This paper also discusses the efficiency of game-based learning, the mechanism of how fraction games might enhance learning, and the potential of integrating game-based learning in educational settings.     

温拌LDPE改性沥青混合料性能研究

选择Sasobit和Evotherm 3G两种温拌剂对温拌LDPE沥青混合料制备工艺和性能进行研究。首先,比较变温等体积法和等黏温度法两种方法,并确定两种温拌混合料的拌和及击实温度。在此基础上,分别采用车辙试验、低温弯曲试验、中点加载弯曲试验以及冻融劈裂试验评价70#、LDPE、Sasobit-LDPE以及3G-LDPE四种沥青混合料的高温性能、低温性能、疲劳性能和水稳定性。结果表明,两种温拌技术均是可行的,Sasobit和3G温拌技术可使施工温度降低20℃和15℃。与热拌LDPE沥青混合料相比,Sasobit温拌沥青混合料具有更好的高温性能和水稳定性,在高应力比条件下抗疲劳性能更好,低温性能虽变差,但是优于70#沥青混合料;3G温拌沥青混合料的高温性能,低温性能以及水稳定性则与热拌LDPE沥青混合料各项性能较为接近,抗疲劳性能变差,但是优于70#沥青混合料。     

一种新型回路电阻测试仪的研究与设计

针对传统低压回路电阻测试仪只能在被测设备停电时使用的一大限制,本文提出并设计了一种新型低压回路电阻测试仪。该仪器可在低压设备运行状态下对其回路电阻进行测量,在保证测量精度的前提下减少了设备停电率,大大提高了工作效率。     

沥青组成与乳化沥青稳定性的灰熵关联研究

为研究乳化沥青储存稳定性与沥青组成及性质之间的关系,选用四种基质沥青,对其基本性质、四组分组成、元素组成和平均结构单元参数进行了分析。并分析了四种基质沥青制备的乳化沥青的储存稳定性。采用灰熵关联分析研究了乳化沥青储存稳定性与沥青的化学组成及基本性能之间的关系。结果表明:四组分组成中,胶质和沥青质含量是影响乳化沥青储存稳定性的最主要因素,胶质和沥青质含量越高,储存稳定性越好。元素组成中,杂原子含量是影响乳化沥青储存稳定性的最主要因素,杂原子含量越高,稳定性越好。然而,沥青的基本性质和平均结构单元参数与乳化沥青的储存稳定性之间没有明显的相关性。     

Recent Advances in Conjugated Polymers for Visible-Light-Driven Water Splitting

With the ambition of solving the challenges of the shortage of fossil fuels and their associated environmental pollution, visible-light-driven splitting of water into hydrogen and oxygen using semiconductor photocatalysts has emerged as a promising technology to provide environmentally friendly energy vectors. Among the current library of developed photocatalysts, organic conjugated polymers present unique advantages of sufficient light-absorption efficiency, excellent stability, tunable electronic properties, and economic applicability. As a class of rising photocatalysts, organic conjugated polymers offer high flexibility in tuning the framework of the backbone and porosity to fulfill the requirements for photocatalytic applications. In the past decade, significant progress has been made in visible-light-driven water splitting employing organic conjugated polymers. The recent development of the structural design principles of organic conjugated polymers (including linear, crosslinked, and supramolecular self-assembled polymers) toward efficient photocatalytic hydrogen evolution, oxygen evolution, and overall water splitting is described, thus providing a comprehensive reference for the field. Finally, current challenges and perspectives are also discussed.     

CPU-GPU协同计算在MOC中子输运异构并行计算中的应用研究

特征线方法（MOC）可以精确求解任意几何的中子输运方程，但该方法收敛慢、计算时间长。本研究基于空间区域分解和特征线并行技术，采用MPI+OpenMP/CUDA编程模型，实现了适用于中央处理器-图形处理器（CPU-GPU）异构系统的二维MOC异构并行算法。为充分利用异构系统中的CPU和GPU计算资源，实现CPU-GPU协同计算，提出动态任务分配模型，根据CPU和GPU的计算能力合理分配计算任务。数值验证结果表明:程序具有良好的计算精度；动态任务分配模型能根据硬件性能给出最佳任务分配方案；5异构节点（包含20块GPU）并行时，相对MPI+CUDA并行模式，采用CPU-GPU协同计算后，程序整体效率提升达到14%。      

镀锡板钝化污染控制技术

介绍了电镀锡机组钝化污染缺陷的宏观形貌;从挤干设备、助熔工艺、钝化工艺、钝化设备等方面分析了钝化污染产生的原因。通过产线实践,发现助熔挤干辊位置,钝化段槽液中重铬酸钠浓度和p H值与钝化污染缺陷的产生无关,钝化极板的清洁程度、钝化液的老化程度以及助熔液的清洁程度才是导致钝化污染的主要原因。通过调整助熔槽液浓度,保证钝化极板清洁性,钝化污染缺陷得到有效控制。     

Achieving Rich and Active Alkaline Hydrogen Evolution Heterostructures via Interface Engineering on 2D 1T‐MoS2 Quantum Sheets

Large‐scale production of hydrogen from water‐alkali electrolyzers is impeded by the sluggish kinetics of hydrogen evolution reaction (HER) electrocatalysts. The hybridization of an acid‐active HER catalyst with a cocatalyst at the nanoscale helps boost HER kinetics in alkaline media. Here, it is demonstrated that 1T–MoS₂ nanosheet edges (instead of basal planes) decorated by metal hydroxides form highly active ${\text{edge}}_{{\text{1T‐MoS}}_{\text{2}}}$/ ${\text{edge}}_{\text{Ni}{(\text{OH})}_{\text{2}}}$ heterostructures, which significantly enhance HER performance in alkaline media. Featured with rich ${\text{edge}}_{{\text{1T‐MoS}}_{\text{2}}}$/ ${\text{edge}}_{\text{Ni}{(\text{OH})}_{\text{2}}}$ sites, the fabricated 1T–MoS₂ QS/Ni(OH)₂ hybrid (quantum sized 1T–MoS₂ sheets decorated with Ni(OH)₂ via interface engineering) only requires overpotentials of 57 and 112 mV to drive HER current densities of 10 and 100 mA cm^?2, respectively, and has a low Tafel slope of 30 mV dec^?1 in 1 m KOH. So far, this is the best performance for MoS₂‐based electrocatalysts and the 1T–MoS₂ QS/Ni(OH)₂ hybrid is among the best‐performing non‐Pt alkaline HER electrocatalysts known. The HER process is durable for 100 h at current densities up to 500 mA cm^?2. This work not only provides an active, cost‐effective, and robust alkaline HER electrocatalyst, but also demonstrates a design strategy for preparing high‐performance catalysts based on edge‐rich 2D quantum sheets for other catalytic reactions.     

镍基MOF电极材料物理超声改性及电化学性能

采用水热法合成了以4,4′-联苯二甲酸(BPDC)为配体的Ni-金属有机框架(MOF),利用低成本、无污染的物理超声法在不改变Ni-MOF晶体结构的前提下对其进行改性,使块状Ni-MOF表面产生孔隙,改善Ni-MOF表面微/纳米结构,提高其电化学性能。通过扫描电子显微镜(SEM)图、X射线衍射(XRD)谱、循环伏安(CV)曲线和恒电流充放电(GCD)曲线分析了改性前后Ni-MOF的微结构形貌和电化学性能。结果表明,经过超声处理后,Ni-MOF的比表面积从40.6 m^2·g^-1增加到65.8 m^2·g^-1,平均孔径从12 nm增加到22 nm。在0.5 A·g^-1电流密度下,超声处理后Ni-MOF电极比电容从420 F·g^-1增加到515 F·g^-1,提高了22.6%,电荷转移电阻明显降低,从25.11Ω降低到15.51Ω。因此,物理超声法可有效改善Ni-MOF表面微/纳米结构,提高其电化学性能。